Відео

What are your thoughts product wise for a vintage Vette, I have a 75. Primer brand- I am thinking slick sand from Evercoat primer- House of Kolor 2 stage, PPG, Sikkens, exc... Thank you.

Depends on the clear coat you’re using . And how fressh the clear coat is . I’m very hesitant using 2000 it creates swirl marks, even hitting it with 3000 . Heavy RPM on your white pad, heat it up faster

You will LOVE the 923-460 clear dude. It’s the best I’ve ever sprayed. The absolute best there is no comparison

Kandy Man , beautiful work as usual. I’m also a professional painter in Michigan. Was wondering when you start a job , when your cleaning a scuffing are you using solvent or water cleaner?

so thats when you have no color code got it. for a normal color that you have a code and put in and use Prime and test it out but is not close what do you if your at home. because we dont have color chips. now lets say i did have them and none of them work do i use the camera as my last resort

Gotta try that thing

PPG is more user friendly than 100 line

Man watching your videos is just such a learning experience every time, your a absolute master at what you do 🤙

do u have a branch in dubai how did we can contact withe u ?

Thats nice im going for a satin black on my Ford wagon is it best to use a reg base coat black with satin clear or one of the 2k satin hot rod blacks with no clear since its like a single stage

Your going to love 100Line

If this pad removes texture, than it is sending 🙂

ALWAYS take pride in your work!!!

Just the video I was looking for. I left a fender that had fresh epoxy primer on it outside that didn't have time to cure and it got rained on. The next morning it has rust spots on it. I had to completely sand it down to bare metal and use Eastwood Fast Etch to get rid of the surface rust. Working under a 10' x 10' Harbor Freight canope. Have a 10' x 10' cloth side wall on order from Temu to block out the late afternoon sun.

If you can what clear do you recommend for a restoration car project ? Thank you

...that color is my absolute favorite!!!

Good morning Kandy Man and good luck with the new owners. You will always be a great teacher as well as a great asset to whoever you work for. Your knowledge and work ethics are second to none. Enjoy your day in sunny Florida.

At the shop that I'm at we use envirobase clear ec 530 and ec550 have tou ever tried it ? Like your content 👍

Yessir! Love 100line it’s the only I’ve ever sprayed I will say keep it wet brother. Can’t wait to see your take on it cuz some colors I’ve been having trouble with. That 45 degree angle too

Are there ever instances when a roof needs to be cut off & replaced instead of doing PDR work? We have a 2014 Ram 2500 that got hit with up to golf ball size hail. There might be 10 dents on the roof. It doesn’t look too bad to me, but our insurance put in our estimate for the roof to be replaced using one from a junk yard. I don’t like the sound of that. Seems like it won’t be as structurally sound.

At 7:50 you say the other cap puts it down slicker than the dvr clear, what cap is that mate? Which cap puts it down like glass? I assumed it would be the dvr clear but obviously not

What is a wet bed? Do you mean with clear base? And was the wet bed across the entire panel?

I'm trying to find those self etching wipes you used on one of your past videos. Can you help me with a link or description. Thank you

🔥 TEAM IWATA

🔥 Turn down the gloss TEAM IWATA

Always a pleasure watching your material that you do. It takes a strong minded individual , one with your experience and skill set to come and out and completly humble yourself to the changes and new learning of a system.. The transparency and all the honesty goes a long way for me personally, and I feel its safe to say for all the veiwers. All the best off luck to you and the original team, as well as the new team that has come aboard..Keep up the awsome painting and videos..Much appreciated!!!

Exciting news! Can't wait to see the results with the new paint line. We sent you an email, take a look.

If you have big hits do you do the metal work first? Or do you prime and then do the body work , thats what doesn’t makes sense to me because to take out the big hits you need to go to bare metal again in order to pull the hits out

Good luck with that BASF. I used their lines and I am sticking with PPG. Just my experience.

Can you just use the green gun for clear as well?

Wish your shop was in NJ😂

BASF paints excellent.

Can you believe some shops use shopline or Omni if you put that on my car I will sue you and probably try to fight you my car or vehicle would never get repairs where they use paint that peels off in like 4 years

Good luck. I don't think I could ever work for a corporate body shop. I had a hard enough time working in a mom and pop 20 years ago. They didn't do things correctly, and these large MSO's are all about money.

Turn down the gloss TEAM IWATA

Good luck dude!!! That’s all I can say I do hope it works out for all of you!!

Good luck with the new organization! I know Florida is hot and humid. I used to live in Minnesota which is similar in the summer but now I live in hot and dry Idaho. I had an issue with one brand of urethane not setting up in the dry heat as quick as you would have expected and the result was sags. A little research found that a factory in England was experiencing a similar issue in the dry winter where the only difference was low humidity so they added a humidifier to the booth. I have never used BASF but when talking to a local dealer, I told them the humidity story and he said BASF actually has an additive for low humidity conditions. Based on that, I think you will be happy with the line. Looking forward to how it goes.

Dude! Thats pretty wild man! Hope everything goes well, right now we are actually in discussions at my shop with BASF and PPG, we are using Envirobase but our contract is ending and we are considering the 100 line also, BASF boys are gonna come out for a week and let us try it out. So please by all means!, let us know your honest opinion on the paint lines.

Can’t stress a respirator enough! Stupid me went for years trimming out parts and doing bodywork without anything ! Lungs are screwed now! Does this unit have tearoffs on the face or could i use denatured alcohol to clean overspray off? Also has anyone used it for sanding filler and etc? Had cataract surgery recently and want to keep out the dust from getting in my eyes.

I was used to using the newest Sata for clearcoat, but that new Iwata really lays everything down well

Awesome news. I bought my 71 Camaro, that had been painted with BASF, and I didn't even realize they made auto paints. I'll be looking forward to your thoughts and experience with it.

They just bought my shop in n.h

PPG = Painters Prefer Glasurit. Seriously though, good luck through the Crash transition. This is only going to make your 'stock' as a painter increase. 100-Line is the latest/greatest and there is NO stopping it.